IT preču, elektronikas un sadzīves tehnikas vairumtirdzniecība
ELKO kods
1283732
Kingston Technology ValueRAM . Component for: PC/Server, Internal memory: 4 GB, Memory layout (modules x size): 1 x 4 GB, Internal memory type: DDR4, Memory form factor: 288-pin DIMM, CAS latency: 19, Product colour: Berry, Green
Tehniskā specifikācija
Features
Backlight
No
Buffered memory type
Unregistered (unbuffered)
CAS latency
19
Compatible products
370 ROG STRIX H370-F GAMING
D840MA Desktop Series
D840MB Desktop Series
D840SA Desktop Series
PRIME B350 - PLUS
PRIME B350-PLUS
PRIME B350M - A
PRIME B350M-A
PRIME B350M-A/CSM
PRIME B360-PLUS/CSM
PRIME B360M-A
PRIME B360M-C/CSM
PRIME B360M-K
PRIME B450
Component for
PC/Server
Cooling type
Heatsink
Country of origin
Taiwan
ECC
No
Internal memory
4 GB
Internal memory type
DDR4
JEDEC standard
Yes
Lead plating
Gold
Linux operating systems supported
Yes
Mac operating systems supported
Yes
Memory channels
Single-channel
Memory data transfer rate
2666 MT/s
Memory form factor
288-pin DIMM
Memory layout (modules x size)
1 x 4 GB
Memory ranking
1
Memory voltage
1.2 V
Module configuration
512M x 64
Product colour
Berry/Green
Programming power voltage (VPP)
1.2 V
Refresh row cycle time
350 ns
Row active time
32 ns
Row cycle time
45.75 ns
Windows operating systems supported
Yes
Operational conditions
Operating temperature (T-T)
0 - 85 °C
Storage temperature (T-T)
-55 - 100 °C
Sustainability
Compliance certificates
RoHS
Doesn't contain
Halogen
Weight & dimensions
Height
31.25 mm
Width
133.35 mm
Harmonized System (HS) code
84733020
ValueRAM's KVR26N19S6/4 is a 512M x 64-bit (4GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 1Rx16, memory module, based on four 512M x 16-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. Each 288-pin DIMM uses gold contact fingers.
- Power Supply: VDD = 1.2V Typical
- VDDQ = 1.2V Typical
- VPP = 2.5V Typical
- VDDSPD = 2.2V to 3.6V
- Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
- Low-power auto self refresh (LPASR)
- Data bus inversion (DBI) for data bus
- On-die VREFDQ generation and calibration
- Single-rank
- On-board I2 serial presence-detect (SPD) EEPROM
- 8 internal banks; 2 groups of 4 banks each
- Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
- Selectable BC4 or BL8 on-the-fly (OTF)
- Fly-by topology
- Terminated control command and address bus
- PCB: Height 1.23” (31.25mm)
- RoHS Compliant and Halogen-Free
Produktu pieejamība var atšķirties atkarībā no ELKO izplatīšanas reģiona.